ferryboy4

Add a Sparkle to Your Fiat 500 Key Fob These cute Silicone Covers will add a little excitement to your Fiat 500 Key fob. They are easy to install and snap in place of your original black cover. The silicone covers protect the keys from dust, splashes and other contaminants. They also make your key look much more fashionable. The signals from the remote control are not affected and continue to work even when the cover is closed. Guard your key from splashes, dust, and other contaminants Add a touch of style to your keys with this silicone cover. It will fit perfectly over your key fob without loosening. It also shields your keys from splashes and dust. The cover's silicone will not alter the signals transmitted by your key remote. Therefore, you can use your key fob's buttons just as you would normally. Accessorize your Fiat 500 in Grey or Black with these cool covers. These covers are great if your original cover is looking a little damaged, scratched, or scratched. The covers are made of high-quality silicone. They come with two key rings, so you can change them whenever you are bored with the same color. These covers replace the stock, black key cover on your vehicle. These covers will not fit if you already have the original key cover. Looks great Fiat are a truly unique and iconic Italian brand and their cars have a great style that makes them stand out from the rest. These dazzling car key covers are a simple and fun method to add a bit of glamour to your keys, without becoming too overwhelming. They look stunning on your key fob and can really freshen up a worn out one. These covers snap into the desired position and are designed to replace your original black cover. It is best to remove the original cover prior to installing the new one. The Fiat logo is available in both Grey and Black. You can change the colors if you decide to! These are also great presents for Fiat 500 drivers. Easy to install Fiat 500 key covers can be a great way to update your keys. You can choose from a variety of styles and colors to choose the one that matches your style. The most attractive thing is that they're easy to install, so you can install them yourself in less than 10 minutes. You only need a screwdriver, and some patience. The first step is to take off the cover that was originally installed. The original cover needs to be removed before the replacement cover can be put in place. After removing the old cover after removing the old cover, you can use a flathead to pry the four main attachment clips off the passenger side of fob assembly. These are marked in red in the image below. Also note the tabs that locate slots that are highlighted in yellow. They require disengagement in addition. Replace the battery with a # CR2032 coin cell battery. Make sure that the “+” positive side of the battery corresponds to the opening in the fob, and that the –” negative side is facing toward the rubber buttons. Re-attach the passenger side mirror cover by aligning the locating tabs. Once you have completed this, put the fob for the driver side back in your vehicle and test it by pressing the push button on the front of the car key. If everything works correctly the car should turn on the parking lights, and the doors will lock automatically. Easy to remove Fiat 500 Key Covers are an excellent way to upgrade your key fob. fiat 500 keys to install and provide a unique appearance. They shield your key fob from dirt, scratches, and smudges. However, before you are able to install a new cover for your key you must take off the original cover from your vehicle. You can easily accomplish this by pressing the “Fiat” red button on the front face of your key fob. By pressing the button you will release a lever that allows you slide out the metal ignition switch (1). After removing the key, you'll see an elongated silver switch with images of an unlocked and locked padlock next to it. This is the key fob battery switch. The battery is simple to replace by turning the switch for a quarter turn using a small flathead screwdriver. The key fob has a microchip in it that is used to communicate with the Body Control Module (BCM). When you insert your Fiat key, it presses a button in the ignition switch that is used to remind you of the “key-inignition”. The BCM will then read the transponder on the key fob in order to confirm that it is valid. You can also add a design twin pack to your key covers to give it a an original and fun look. These covers snap on top of your original cover. They are available in Cream or silver. The key cover will only work if you remove the black cover from your key fob.